|Zebulon McCorkle 5dc9c9f824 Bump version to 3.4-3, I guess.||9 months ago|
|debian||9 months ago|
|src||1 year ago|
|.gitignore||1 year ago|
|Makefile||1 year ago|
|NEWS.md||1 year ago|
|README.md||1 year ago|
|UNLICENSE||2 years ago|
|config.h||1 year ago|
|enchive-mode.el||1 year ago|
|enchive.1||1 year ago|
Enchive is a tool to encrypt files to yourself for long-term archival. It’s a focused, simple alternative to more complex solutions such as GnuPG or encrypted filesystems. Enchive has no external dependencies and is trivial to build for local use. Portability is emphasized over performance.
Supported platforms: Linux, BSD, macOS, Windows
The name is a portmanteau of “encrypt” and “archive,” pronounced en’kīv.
Files are secured with ChaCha20, Curve25519, and HMAC-SHA256.
Clone this repository, then:
$ make PREFIX=/usr install
This will install both the compiled binary and manual page under
PREFIX. For staged installs,
DESTDIR is also supported. The binary
doesn’t have any external dependencies and doesn’t actually need to be
installed before use.
There are only three commands to worry about:
extract. The very first thing to do is generate a master keypair
keygen. You will be prompted for the passphrase to protect the
secret key, just like
$ enchive keygen
By default, this will create two files in
enchive.pub (public key) and
enchive.sec (secret key). On Windows, these are found under
%APPDATA%\enchive instead. Distribute
enchive.pub to any machines
where you plan to archive files. It’s sufficient to encrypt files, but
not to decrypt them.
To archive a file for storage:
$ enchive archive sensitive.zip
This will encrypt
the original in place). You can safely archive this wherever.
To extract the file on a machine with
will prompt for the passphrase you entered during key generation.
$ enchive extract sensitive.zip.enchive
sensitive.zip will be reproduced.
With no filenames,
extract operate on standard input
One of the core features of Enchive is the ability to derive an
asymmetric key pair from a passphrase. This means you can store your
archive key in your brain! To access this feature, use the
-d) option with the
$ enchive keygen --derive
There’s an optional argument to
--derive that controls the number of
key derivation iterations (e.g.
--derive=26). The default is 29.
This is a power two exponent, so every increment doubles the cost both
in memory and computational demands.
If you want to change your protection passphrase, use the
keygen. It will load the secret key as if it were going
to “extract” an archive, then write it back out with the new options.
This mode will also regenerate the public key file whether or not it
Enchive has a built-in protection key agent that keeps the protection
key in memory for a configurable period of time (default: 15 minutes)
after a protection passphrase has been read. This allows many files to
be decrypted inside a brief window with only a single passphrase
prompt. Use the
-a) global option to enable it. If it’s
enabled by default, use
--no-agent to turn it off.
$ enchive --agent extract file.enchive
Unlike gpg-agent and ssh-agent, this agent need not be started ahead of time. It is started on demand, shuts down on timeout, and does not coordinate with environment variables. One agent is created per unique secret key file. This feature requires a unix-like system.
The major version number increments each time any of the file formats change, including the key derivation algorithm.
There’s no effort at error recovery. It bails out on early on the first error. It should clean up any incomplete files when it does so.
A purposeful design choice is that encrypted/archived files have no distinguishing marks whatsoever (magic numbers, etc.), making them indistinguishable from random data.
No effort is made to set stdin and stdout to binary mode. For Windows this means passing data through Enchive using stdin/stdout isn’t useful. This is low priority because Microsoft’s UCRT file streams are broken anyway when pipes are involved.
This tool will never achieve critical mass, so what’s the point?
Enchive doesn’t need to interact with any other systems or people, so there’s no need for critical mass, nor that there are any other users.
Why can’t you use an existing/established tool instead?
I’m not aware of any tool that does everything Enchive does. GnuPG comes close, but doesn’t support deriving a key pair from a passphrase. If you’re aware of an equal or better tool, please let me know.
Isn’t it dangerous to derive a key pair from a passphrase?
It is when it’s done incorrectly. However, Enchive uses a memory-hard key derivation scheme that makes cracking passphrases very expensive — prohibitively so for any decent passphrase. This is because anyone who has access to even a single encrypted file can mount an offline attack.
Deriving asymmetric keys from a passphrase is a standard practice in the Bitcoin world: brainwallets. The caveat is that the passphrase must be sufficiently long, preferably chosen by a computer or with dice.
When generating a master key, Enchive’s default configuration is extremely paranoid. It would be far cheaper to break into your home and perform an evil maid attack than it would be to crack even a short passphrase. This is not the weak point.
Shouldn’t the initialization vector (IV) be generated randomly?
The purpose of an IV is to allow the same key to be safely used multiple times. This is particularly important when the same key is derived on different occasions by Diffie-Hellman between the same key pair. Enchive generates a random ephemeral key pair each time a file is encrypted, so the IV is unnecessary.
Since ChaCha20 requires an IV regardless, Enchive simply uses the hash of the key. This has the additional effect of allowing the client to verify its symmetric key before beginning decryption. Otherwise a wrong key would only be detected by the MAC after decryption has completed.
I’m getting the error “Value too large for defined data type.”
This is a flaw in the 32-bit version of glibc that prevents C programs from even opening files larger than 2GB. Compile with “large file support” enabled:
make CFLAGS='-O3 -D_FILE_OFFSET_BITS=64'
Alternatively, use your shell to open files for Enchive:
$ enchive archive <largefile >largefile.enchive
Note that Enchive will not be able to delete shell-opened files in case of errors (tampering, etc.).
The process for encrypting a file:
The process for decrypting a file:
Enchive uses an scrypt-like algorithm for key derivation, requiring a large buffer of random access memory. Derivation is controlled by a single difficulty exponent D. Secret key derivation requires 512MB of memory (D=29) by default, and protection key derivation requires 32MB by default (D=25). The salt for the secret key is all zeros.
(1 << D) + 32byte buffer, M.
HMAC_SHA256(salt, passphrase)and write this 32-byte result to the beginning of M.
1 << (D - 5)times.
To build on any unix-like system, run
make. The resulting binary has
no dependencies or external data, so you can just copy/move this into
The easiest way to build with Visual Studio is to use the amalgamation
build. On any unix-like system (requires
$ make amalgamation
This will create
enchive-cli.c, a standalone C program that you can
copy anywhere and compile. Over on Windows:
C:\> cl.exe -nologo -Ox enchive-cli.c advapi32.lib
The compile-time options below also apply to this amalgamation build.
Various options and defaults can be configured at compile time using C
Whether to expose the
--no-agent option. This option
is 0 by default on Windows since agents are unsupported.
The default agent timeout in seconds. This can be configured at run
time with an optional argument to
Whether or not to enable the agent by default. This can be explicitly
overridden at run time with
The default program to use for
Whether or not to use
pinentry by default when reading passphrases.
The file extension to add when archiving and remove when extracting. The
.enchive, as it appears in the examples.
Power-of-two exponent for protection key derivation. Can be configured
at run time with
Power-of-two exponent for secret key derivation. Can be configured at
run time with the optional argument to
Maximum passphrase size in bytes, including null terminator.